19
HOOK THROUGH
NEEDLE EYE (FROM
BACK TO FRONT)
THREAD UNDER
THREADER HOOK
USING THE NEEDLE THREADER
WARNING
1. REMOVE THE PROTECTION COVERING FROM AROUND THE SMALL HOOK.
2. SWITCH OFF THE POWER TO THE SEWING MACHINE
3. MAKE SURE THE NEEDLE IS RAISED TO THE HIGHEST POSITION
4a. HOLD THE THREADER BY ITS HOLDER
b. POSITION THE TOP CONCAVE
(CUT OUT) CURVE UNDER THE
NEEDLE CLAMP FROM RIGHT
TO LEFT (YOU CAN OMIT THIS
STEP (4b))
5. INSERT THE THREADER HOOK THROUGH THE NEEDLE
EYE/HOLE FROM BACK TO FRONT OF NEEDLE
6. PASS THE SEWING THREAD ACROSS THE FRONT OF THE NEEDLE, UNDER THE THREADER HOOK.
7. PULL THE HOOK BACK THROUGH THE EYE OF THE NEEDLE AND A LOOP SHOULD APPEAR AT THE BACK OF THE NEEDLE.
8. PULL THE LOOP THROUGH TO THE BACK OF THE SEWING MACHINE.
N.B.IF IT DOES NOT WORK THE FIRST TIME, TRY AGAIN.
THIS IS NOT A TOY. HANDLE WITH CARE. KEEP AWAY FROM CHILDREN
TOP CUT OUT
ADDENDUM
1.HOLDER
2.HOOK AREA
1
2
PDF created with pdfFactory trial version
www.pdffactory.com