14
Machine Setting
Stitch
Stitch selector
Zig Zag
foot
Top thread tension
control 1 to 4
Stitch length control
any number (not
necessary to adjust)
Darning plate
Use the darning plate for button sewing. (See page 10 )
To
strengthen the shank,
cut
the
threads leaving a 20 cm (8" ) tail .
Bring
the
needle
thread
down
through the hole in the button
and
wind it around the shank.
Draw the thread to the wrong side
and knot.
A pin can be placed on top of the button to form a shank.
Set the stitch selector at "
". Align the both holes of the button
with
the slot of the foot and place the left hole of the button just below the
needle point.
Lower
the foot and
turn the pattern
selector
until the
needle point comes just above the right
hole of the but ton. Sew about five
stitches and raise needle. Set t he stitch selector at "
" again and sew a
few st itches to lock thread.
Sewing Buttons
PDF created with pdfFactory trial version
www.pdffactory.com
