10
To Put on the Darning Plate:
1.
Position
the
darning plate with
the 3 pins on the bottom.
2.
Fit the darning plate pins into the
needle plate holes. The feed dogs
will
show
through
the
darning
plate holes.
As l ong as you keep the reverse stitch
control depressed, the machine sews
backwards.
T he numbers on th e needle plate ind i-
cate the dista nce between the center
needl e position and the line.
Use Left N eedl e Position for more.
con trol
while
topstitching
or edge
stitching difficult fabrics.
NOTE:
Use only zigzag presser foot
for Left Needle Sewing.
T he numbers in the front indicate in
m illimeters .
T he numbers in the back indicate in
inches .
Reverse Stitch Control
Seam
Gu ide
Line
Darning Plate
Left Needle Position
Adj usting S tretch S titch Balance
To
select Stretch Stitches, set this control
at SS
position.
In stretch stitch sewing,Stitch Length Control should
be in the Center position between-and+(SSposition)
stitches.
To shorten
stretch stitches, turn the control slightly
toward "-" To lengthen, turn toward "+"
for mo st materials. Depending upon the type of fabric
used. you may need to adjust this control
to match
forward stitches of stretch sewi ng with reverse motion
Setting mark
Stitch Length Control
Stitch Len gth
SS
Stitch selector
Smocking stretch
Rick rack stretch
PDF created with pdfFactory trial version
www.pdffactory.com
