Eagle EV-30, Owner'S Manual

Page: 73 / 135

rev_0.6 73 / 135
In the drawing window, you can review the current result, and optimize the layout by hand if necessary. For
example, in the result shown above, there is a part in the upper right area which sticks out than the others
apparently.
We can fit it in the upper left area to make the result more compact.
After optimization, the result will be tagged with a red label Modified in the summary.
IMPORTANT
Actually, you can do all kinds of edits on the nesting result, e.g. move and rotate parts, scale parts,
delete or make a new copy of parts, even construct a different new part. But we recommend do ONLY
MOVING OR ROTATING when necessary. The software cannot track and reflect other kinds of
modifications in the part library and nest reports.