manualshive.com logo in svg

Eagle EV-30, Owner'S Manual

Share
Download
Eagle EV-30 Owner'S Manual Download Page 64

rev_0.6

64 / 135

Button

Menu
Command

Command

Function

Point Arc

Draw an arc by specifying three points.

Scan Arc

arc

Draw an arc by specifying the center, the radius, the start and
the end points.

Ellipse

ellipse

Draw an ellipse.

Polyline

Draw a polyline.

Polygon

polygon

Draw a polygon.

Star

Draw a star.

Point

point

Draw a point.

Text

text

Draw a letter sequence.

The command prompts will be shown in the Draw command window no matter how you select the
command, and you can get hints there on how to complete the command. Complete the drawing command
by left-click for setting points in the drawing window, by right-click for bring up the context menu, by
entering appropriate parameters, or by a combination of them.

The Rectangle, Circle, Polygon command and the commands similar with them will automatically create
closed contours which are ready for setting technology.

Summary of Contents for EV-30








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands