![background image](http://html1.mh-extra.com/html/eagle-eye-power-solutions/bqms/bqms_installation-manual_3279409020.webp)
20
BQMS Installation Manual
052319
5.4.4 Connection of Clamps (O-Type)
1.
Connect clamps according to the provided connection diagram.
2.
Determine how the clamp will be placed. Generally, the wire terminations should be facing
the direction the sensing cable(s) will come from.
3.
Place the clamp over the center of the cable and tighten the screws into the cable
NOTE:
If the cable is too large for the clamp it can cut down to accommodate the size.
4.
Attach additional clamps, keep the direction and placement of all clamps consistent.
O-Type Clamp Connections
Breaking Points