Page B-8
SAFETY
Repair and Service Manual
Read all of Section A and this section before attempting any procedure. Pay particular attention to all Notices, Cautions and Warnings.
prevent the use of the carrier until the leak has been elim-
inated.
(o) The carrier manufacturer’s capacity, operation, and
maintenance instruction plates, tags, or decals shall be
maintained in legible condition.
(p) Batteries, motors, speed and directional controllers,
limit switches, protective devices, electrical conductors,
and connections shall be inspected and maintained in
conformance with manufacturers recommended proce-
dures.
(q) Carriers shall be kept in a clean condition to mini-
mize fire hazards and facilitate detection of loose or
defective parts.
(r) Modifications and additions which affect capacity
and safe machine operation shall not be performed by the
customer or user without manufacturer’s prior written
authorization; where authorized modifications have been
made, the user shall ensure that capacity, operation,
warning, and maintenance instruction plates, tags, or
decals are changed accordingly.
(s) Care shall be taken to ensure that all replacement
parts are interchangeable with the original parts and of a
quality at least equal to that provided in the original equip-
ment.
End of ASME/ANSI B56.8-1988, Part II
