![E-XTEQ DCBS User Manual Download Page 50](http://html1.mh-extra.com/html/e-xteq/dcbs/dcbs_user-manual_3172964050.webp)
50/52
DCBS
User Manual / Ref. MAN_DCBS_GM_EN_V1.0
Support Information 1/2
FROZEN BATTERIES ////////
If the battery
temperature is too low,
(below 32°F / 0°C) the
tool will show a battery
with an X through it and
have an audible chime
simultaneously.
Charging a frozen battery is not recommended.
Please warm up the battery to room temperature before charging.
SULFATED BATTERIES ////////
If sulfation is found on
the battery, the tool will
show a battery with an
X through it and audible
chime simultaneously.
WRONG BATTERIES ////////
If a wrong value on the
battery type is detected,
the tool will show a
battery with an X through
it and have an audible
chime simultaneously.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Trolley LED’s
Remote Presentation
Remote Job Storage
Accessories
Initial Setup
Installation
Battery Cable Clamps Connection
Power Cable Connection and Power On
Dealer Id. N°
Wi-Fi Connection (Remote to Trolley)
Physical Connection (Remote to Trolley)
Update
Settings
Preferences
Other Settings
Diagnostic and Charge
Remote handheld diagnostic tester
-Manual Selection of Battery
-Vehicle Selection from Database
-Start Diagnostic & Results
Trolley Diagnostic
-Complete Diagnostic & Results
-Pre Delivery Inspection Test (PDI) & Results
-Charge & Results
-Load Test & Results
-Enhanced Diagnostic Mode (EDM) & Results
-Reserve Capacity Test & Results
History (Results Storage)
Optimus
-Optimus Installation
-Using Optimus
Support Information
-Batteries
-Error Messages
Warranty