35/52
DCBS
User Manual / Ref. MAN_DCBS_GM_EN_V1.0
Diagnostic and Charge 16/24
CHARGE (LI-ION 12V BATTERIES) ////////
Confirm that Li-Ion Recovery Mode
is the desired action.
PLEASE PAY ATTENTION TO THE FOLLOWING WARNING SCREENS FOR
YOUR SAFETY
Confirm the Clamps are connected
properly to the Li-Ion 12V battery.
Press the button to start the
Li-Ion Recovery procedure.
If the recovery procedure is
successful, the DCBS will wake up
and charge the Li-Ion 12V battery.
If everything is connected properly
and the Li-Ion 12V battery is awake,
the DCBS will start the charge
normally.
If the recovery procedure is
unsuccessful, the tool will display
a Bad Battery result. (No warranty
code will be generated)
See “RESULTS - CHARGE” section above for other end result possibilities.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Trolley LED’s
Remote Presentation
Remote Job Storage
Accessories
Initial Setup
Installation
Battery Cable Clamps Connection
Power Cable Connection and Power On
Dealer Id. N°
Wi-Fi Connection (Remote to Trolley)
Physical Connection (Remote to Trolley)
Update
Settings
Preferences
Other Settings
Diagnostic and Charge
Remote handheld diagnostic tester
-Manual Selection of Battery
-Vehicle Selection from Database
-Start Diagnostic & Results
Trolley Diagnostic
-Complete Diagnostic & Results
-Pre Delivery Inspection Test (PDI) & Results
-Charge & Results
-Load Test & Results
-Enhanced Diagnostic Mode (EDM) & Results
-Reserve Capacity Test & Results
History (Results Storage)
Optimus
-Optimus Installation
-Using Optimus
Support Information
-Batteries
-Error Messages
Warranty
