27/52
DCBS
User Manual / Ref. MAN_DCBS_GM_EN_V1.0
Diagnostic and Charge 8/24
TROLLEY DIAGNOSTIC ////////
Battery is GOOD (satisfactory SOC
and SOH).
Battery is BAD (unsatisfactory SOH,
regardless of SOC).
Battery needs to be recharged
(Unsatisfactory SOC, Good SOH).
If the test is canceled, the tool will
show “Terminated by User”.
Results - (Complete Diagnostic)
Four different possible result screens.
To generate a warranty code, the tool will ask the user to input the VIN, RO,
and Dealer Identification Number (BAC). All three fields are mandatory for a
warranty code to be generated.
BAC and RO should be
automatically populated. VIN may
need to be inserted depending on
which method was used to start the
test.
After Complete Diagnostic has
been performed, go to the print
icon to print the receipt of the
result. Remote has to be replaced
in the Docking Station to print.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Trolley LED’s
Remote Presentation
Remote Job Storage
Accessories
Initial Setup
Installation
Battery Cable Clamps Connection
Power Cable Connection and Power On
Dealer Id. N°
Wi-Fi Connection (Remote to Trolley)
Physical Connection (Remote to Trolley)
Update
Settings
Preferences
Other Settings
Diagnostic and Charge
Remote handheld diagnostic tester
-Manual Selection of Battery
-Vehicle Selection from Database
-Start Diagnostic & Results
Trolley Diagnostic
-Complete Diagnostic & Results
-Pre Delivery Inspection Test (PDI) & Results
-Charge & Results
-Load Test & Results
-Enhanced Diagnostic Mode (EDM) & Results
-Reserve Capacity Test & Results
History (Results Storage)
Optimus
-Optimus Installation
-Using Optimus
Support Information
-Batteries
-Error Messages
Warranty
