23/52
DCBS
User Manual / Ref. MAN_DCBS_GM_EN_V1.0
Diagnostic and Charge 4/24
REMOTE HANDHELD DIAGNOSTIC TESTER ////////
Start Diagnostic
Once the characteristics of the battery selected the tool will ask to measure the
temperature of the battery.
Do NOT point laser at individuals or reflective objects.
Press the button on the keypad to go to the next screen.
Select battery terminal if these
are accessible. (Bare terminals is
recommended when doing diagnostic
tests)
If the terminals are not accessible,
select Jump start post.
Enter the RO number that is associated
with the JOB.
If the clamps are not connected, the
tool will ask to connect the clamps.
Press the button to start the test.
The tool will do its calculations and
come back with a result.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Trolley LED’s
Remote Presentation
Remote Job Storage
Accessories
Initial Setup
Installation
Battery Cable Clamps Connection
Power Cable Connection and Power On
Dealer Id. N°
Wi-Fi Connection (Remote to Trolley)
Physical Connection (Remote to Trolley)
Update
Settings
Preferences
Other Settings
Diagnostic and Charge
Remote handheld diagnostic tester
-Manual Selection of Battery
-Vehicle Selection from Database
-Start Diagnostic & Results
Trolley Diagnostic
-Complete Diagnostic & Results
-Pre Delivery Inspection Test (PDI) & Results
-Charge & Results
-Load Test & Results
-Enhanced Diagnostic Mode (EDM) & Results
-Reserve Capacity Test & Results
History (Results Storage)
Optimus
-Optimus Installation
-Using Optimus
Support Information
-Batteries
-Error Messages
Warranty
