![E-XTEQ DCBS User Manual Download Page 5](http://html1.mh-extra.com/html/e-xteq/dcbs/dcbs_user-manual_3172964005.webp)
5/52
DCBS
User Manual / Ref. MAN_DCBS_GM_EN_V1.0
Safety Guidelines
2/2
USAGE PRECAUTIONS ////////
Do not use extension cords as there is a risk of fire and electrical shortage.
If use is necessary, check that the extension cord has the following:
1.
Identical plug, cable size and the same electrical wiring as the DCBS.
2.
Make sure the equipment is securely connected before use.
When unplugging the cord from the outlet, hold the frame of the plug to avoid
damaging the plug or power cord. Pulling the cord may cause the cable plug
to break. Replace power cord immediately if damaged.
If the outlet shape does not fit the plug, please contact the E-XTEQ service
department.
Phone: 1.877.453.3265
E-mail: [email protected]
Do not touch the power connector during use.
Keep away and Do Not Touch restricted areas
of this equipment.
DISASSEMBLY/DAMAGE/REMOVAL ////////
Do not disassemble the product or damage or remove the stickers or labels on the
product. If the product’s case has been disassembled or damaged by the user, all
warranties will be void. Always contact a designated E-XTEQ Service Center for
repairs.
Do not insert metallic objects into the unit to prevent electric shock, fire, short
circuit, possible leaking of harmful substances and personal injuries. Do not store
the product in a wet or humid place. Always store the product in a dry place.
CLEANING THE PRODUCT ////////
It is recommended that you clean the product by wiping it gently using a soft cloth.
Do not use water, chemical substances or detergents. They may cause discoloration
or corrosion to the product’s exterior and may cause a fire or electric shock.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Trolley LED’s
Remote Presentation
Remote Job Storage
Accessories
Initial Setup
Installation
Battery Cable Clamps Connection
Power Cable Connection and Power On
Dealer Id. N°
Wi-Fi Connection (Remote to Trolley)
Physical Connection (Remote to Trolley)
Update
Settings
Preferences
Other Settings
Diagnostic and Charge
Remote handheld diagnostic tester
-Manual Selection of Battery
-Vehicle Selection from Database
-Start Diagnostic & Results
Trolley Diagnostic
-Complete Diagnostic & Results
-Pre Delivery Inspection Test (PDI) & Results
-Charge & Results
-Load Test & Results
-Enhanced Diagnostic Mode (EDM) & Results
-Reserve Capacity Test & Results
History (Results Storage)
Optimus
-Optimus Installation
-Using Optimus
Support Information
-Batteries
-Error Messages
Warranty