e-ride Industries
Page 54
5.
Connect the water fill tube female coupler to the vehicles male coupler that has a red cap.
To connect them, just press the two connectors together until it clicks
6.
Squeeze the bulb with firm pressure to pump water into the battery cells. When the bulb
becomes firm the front bank of batteries is full of water.
7.
Immediately disconnect the couplers by pressing the gray button on the female coupling
and replace the red dust cover on the main coupling.
8.
Connect the water fill tube female coupler to the vehicles male coupler that has a black
cap. To connect them, just press the two connectors together until it clicks
9.
Squeeze the bulb with firm pressure to pump water into the battery cells. When the bulb
becomes firm the rear bank of batteries is full of water.
10.
Immediately disconnect the couplers by pressing the gray button on the female coupling
and replace the red dust cover on the main coupling.
