E-ride Industries 2013 Owner'S Manual Download Page 98 | Manualshive

Page: 98 / 102

background image

e-ride Industries

Page 96

Vehicle Servicing

In the event that a vehicle would need service work under the warranty, period the vehicle would be
serviced by a local e-ride dealer. In the case that there is no local e-ride dealer, e-ride Industries will
contact a local golf car, fork lift, or automotive repair shop to service the vehicle. If the vehicle owner
has a repair center they wish to use as a service center e-ride must approve this service center prior to
any work or service performed. Fleet and other vehicle owners can elect to have their own vehicles
maintained and repaired by their team of service mechanics. Contact e-ride Industries customer
service center for help in finding a local authorized service center.

Payment of Service Work

All vehicle parts which are found to be defective under normal use and maintenance within the limited
warranty time will be repaired or replaced without charge to the owner for parts or labor. To all
certified e-ride service centers, dealers and persons that wish to repair their vehicle with their
maintenance crew will be reimbursed for labor according to e-ride Industries allowed time and labor
hourly charge. In any case where e-ride Industries rejects any warranty work or replacement of parts,
e-ride has the choice to bill the owner of the vehicle and which must be paid within 30 days. Also in
any case where a dealer sells the vehicle to the customer including a warranty beyond e-ride’s

«
...
96
97
98
99
100
...
»

Summary of Contents for 2013







































































































Reviews:

No comments

Related manuals for 2013

Brand: B-Speech Pages: 18

Brand: FORM FIT Pages: 2

Brand: V8 equipment Pages: 17

1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28

Brand: Havis-Shields Pages: 3

Brand: Opel Pages: 254

Brand: Saab Pages: 288

Brand: Sunsky Pages: 9

Brand: Kia Pages: 680

Brand: Thule Pages: 8

Brand: Master Tailgaters Pages: 10

Brand: TATA Motors Pages: 232

Brand: SSV Works Pages: 2

Brand: TOP VEHICLE TECH Pages: 8

Brand: Kolpin Pages: 6

Brand: SuperATV Pages: 2

Brand: SpeedTech Lights Pages: 2

Brand: RADICAL Pages: 11

Brand: Hyundai Pages: 380

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands