Level Sensor 8–7
2.
Remove the collapsed diaphragm, clean and dry it, and reshape it to the neutral
position.
3.
Align the mold number on the diaphragm to the hanger on the base. Install the
diaphragm onto the base shell and ensure that it is seated completely.
4.
With the logo upright, set the cover on the base evenly and center the cover snap to
the base hanger. Press the cover only until the snaps engage or damage may occur.
Inspect all four snaps to ensure that they are fully engaged.
Figure 8-23
Figure 8-24
Figure 8-25
Figure 8-26
Figure 8-27
Summary of Contents for Extreme Series
