Tutorials
Steinberg WaveLab Lite
E-MU 0404 PCI Digital Audio System
17
Using the Mono Inputs as a Stereo Pair
6.
Notice that the mono input channels are panned hard left and hard right. This has
been done so that the two mono inputs can be used as a stereo pair.
The two mono
channels will be combined into one stereo signal in the Aux Bus.
7.
If you wish to use the two mono inputs as a stereo pair, simply turn up the Aux 1
Sends for
both mono channels
. (To record in mono, just turn up one channel.)
3 - Recording
1.
Click the red
Record
button on the
WaveLab Lite transport controls. The
Record Window shown below appears.
2.
You should see meter activity on these
meters when your input signal is being fed
into the Digital Audio System.
3.
Click on the bar to open the
Audio File Format
properties. The dialog box shown
below appears.
4.
Set the recording properties as desired, then click
OK
.
Click here for:
Audio File Format
Properties
