14
Important note:
Please read these operating instructions carefully and in their entirety
before commencing work with your new machine. Pay attention to any notes marked
with
Attention!
or
Warning!
Environmental protection
Please take care to dispose of all materials you no longer need in an environmentally
friendly manner. All tools, materials and packaging should be sorted and, if necessary,
handed over to the receiving locations provided for this purpose.
General safety instructions
Attention!
All instructions must be read. Errors in heeding the instructions given below
could cause electric shock, burning and/or serious injuries.
The subsequently used term „power tool“ refers to mains powered electrical tools (with
power cord) and to battery-powered electrical tools (without power cord).
Keep these instructions in a safe place!
Work area
1.
Keep your work area clean and well-lit.
a.
Untidiness and unlighted workspaces can
lead to accidents.
Do not work with this device in an explosive environment where fl ammable
b.
liquids, gasses or dusts are located.
Electrical tools produce sparks that can ignite
dust or fumes.
Keep children and other persons at a safe distance when using the electric tool.
c.
Distractions can cause you to lose control of the device.
Electrical safety
2.
The connector plug of the device must fi t into the power outlet. The plug cannot
a.
be modifi ed in any way. Do not use adapter plugs in conjunction with grounded
devices.
Unaltered plugs and suitable power outlets reduce the risk of electric
shock.
Avoid physical contact with grounded surfaces, such as pipes, heaters, stoves, and
b.
refrigerators.
Increased risk of electric shock exists when your body is grounded.
Keep the device away from rain or moisture.
c.
The penetration of moisture into an
electric device increases the risk of electric shock.
Do not use the cable for any purpose other than its intended purpose; do not
d.
use the cable to carry or hang up the device; do not pull the plug out of the
power outlet via the cable. Keep the cable away from heat, oil, sharp edges, or
moving device parts.
Damaged or tangled cables increase the risk of electric shock.
When you work with a power tool outdoors, only use extension cords that are
e.
approved for outdoor use.
Use of an extension cord that is approved for outdoor
use reduces the risk of electric shock.
E-Flor AHS 18LI.indd D14
E-Flor AHS 18LI.indd D14
10.11.2009 15:09:20 Uhr
10.11.2009 15:09:20 Uhr
