7
E-flite PT-19 ARF Assembly Manual
4. Carefully remove the servo cover from the
wing panel.
5. Position the servo on the servo cover. Center the
servo arm in the cutout in the servo cover
as shown.
6. The servo arm will also be flush with the edge of the
servo cover as shown when it is positioned properly.
7. Once the servo is properly positioned, use a
pencil to trace the servo tabs and servo edges on
the servo cover.
8. Check to make sure the servo mounting block
does not overhang the edge of the servo cover. If
so, you will need to adjust the position of the servo
to make sure both blocks will be on the servo cover.