30
E-flite PT-19 ARF Assembly Manual
13. Thread the adapter nut on the adapter slightly.
It does not need to hold the adapter at this time.
14. Slide the propeller and adapter onto the
motor shaft. Tighten the adapter nut to secure the
propeller to the motor shaft.
Motor Battery Placement
RC/CL Options
Required Parts
Fuselage assembly Motor battery
Battery strap
Hook and loop tape
Required Tools and Adhesives
Scissors
1. Locate the battery strap. Pass the strap under the
battery tray inside the fuselage as shown.
2. Cut a piece of hook and loop material and
apply it to the motor battery as shown.
3. Place the opposite piece of hook and loop
material on the battery tray. This will keep the
battery from moving forward or rearward inside
the fuselage during flight.
4. Position the battery inside the fuselage. Use the
battery strap to secure the battery so it does not
come loose in flight.
The position of the battery can be adjusted to the
front or rear of the fuselage as necessary to adjust the
Center of Gravity when balancing the aircraft for flight.
