5
E-flite PT-19 ARF Assembly Manual
3. Remove the string from the bottom of the wing
and tape it inside the wing. You may want to
convert you PT-19 to radio control at some time,
and the string will be helpful in pulling the servo
extension from the aileron servo through the wing
when you do.
4. Locate the aileron cover for the control line
version of your model. Insert the brass pushrod
connector into the outside hole of the control line
aileron servo cover. Use a pushrod connector
backplate and pliers to secure the connector.
5. Use a #1 Phillips screwdriver and four 2mm x
8mm sheet metal screws to secure the aileron servo
cover to the wing.
6. Slide the aileron pushrod through the hole in the
brass pushrod connector.
7. Use a small piece of low-tack tape to hold the
aileron centered for the next step.
