1
E-flite Jenny JN-4 Slow Flyer ARF Assembly Manual
2. Guide the thread through the hole in the inner strut.
3. A tube has been installed in the fuselage to
pass the rigging thread through to the opposite side
of the fuselage.
4. The rigging thread goes through the hole in the inner
strut then to the outer strut. Glue the thread to the strut
using foam-safe CA.
5. Apply very light tension to the rigging thread and
apply foam-safe CA to the thread to attach it to the strut.
Use scissors to cut the rigging thread once the CA cures.