18
E-flite Jenny JN-4 Slow Flyer ARF Assembly Manual
7. Apply foam-safe CA to the strut where it will come
in contact with the bottom wing. Push the strut tight
against the wing.
8. Apply foam-safe CA to the ends of the struts where
they come in contact with the top wing. Slide the struts
into position and hold the strut while the CA cures.
9. Locate the inner struts. Select a front and rear strut.
The rear strut has a greater angle than the front as shown
in the photo below.
10. Position the inner struts between the top and bottom
wing. Use foam-safe CA to glue the struts to the wings.
11. Repeat Steps 9 and 10 to install the remaining
inner struts.