Designed by Julius Perdana 2023
paper-replika.com
1200mm
Model : 49/2023
Build Instructions :
1. paper-replika.com
2. youtube channel : Julius Perdana
Materials :
1. 5mm Foamboard/ Depron/ Polyfoam
2. 0.3mm Mica Plastic
3. hot glue, UHU glue, CA glue, PVA glue
4. Packing tapes
Electronics for test
- DXW 3536 1200kv
- Prop 10x5 (2 blades) - 11 inch
- 50A ESC - 40A minimum
- Battery Lipo 3S 2200mah
- 4 x 9 gram servos (micro servo)
Transmitter
- Jumper T16 + BetaFPV Express LRS TX module
- 10 ch BetaFPV Express LRS RX
Specs :
1. Wingspan 1200mm / 47.2 inch
2. Flying weight : 1145 grams/ 40.4 oz
3. Wing loading : 26.2 gram/dm2 - 8.6 oz/sq.ft.
4. Wing cube loading : 4 (Between glider and trainer)
5. Wing Area : 43.68 dm2 / 677 sq.in.
6. CG : The rear center wing strut on the upper wing.
Summary of Contents for De Havilland Tigermoth
