1
E-flite Jenny JN-4 Slow Flyer ARF Assembly Manual
Radio Installation
Required Parts
• Assembled fuselage
Sub-micro servo (2)
• Micro pushrod connector (2) • 2mm x 4mm machine screw (2)
• Micro pushrod connector backplate (2)
Required Tools and Adhesives
• Hobby knife
• Phillips screwdriver
1. Use a hobby knife to enlarge the outer hole in
the servo arm. Slide the micro pushrod connector into
the hole.
2. Secure the micro pushrod connector using a micro
pushrod connector backplate.
3. Mount the elevator servo in the fuselage using the
screws provided with the servo.
4. Slide the elevator pushrod wire through the center hole
in the control horn. Place a small bend in the pushrod
wire to apply light tension to keep the pushrod wire from
popping out of the horn.
