7
3.0 NOTES ON SAFETY
The operator or owner of the larger overall system is responsible for following the safety and
accident prevention regulations that apply to the specific application.
Warnings
Electrical shock can result in death or serious injury.
Avoid contact with the leads and terminals.
High voltage that may be present on leads can cause electrical shock.
Mounting and electrical connection of the 1392 must be done by specialists with EMC training,
following all applicable regulations.
The 1392 series of indicators can be used in ambient temperatures up to 55°C.
Higher temperature can result in damage and malfunction.
Do not install the indicator in places where this temperature is exceeded.
DYNISCO
will not be held liable for any injury, loss or damage resulting from failure to follow the
instructions in this manual.
Permanently Connected Equipment
A disconnectable device must be fitted with one of the following items:
a) a switch or circuit breaker shall be included in the building installation
b) it shall be in close proximity to the equipment and within easy reach of the OPERATOR
c) it shall be marked as the disconnecting device for the equipment.