4
Class 1
Laser Product
All necessary for the installation steps are performed upon customer request, to be present with the
knowledge of the possible incompatibility or the product used can vary for operational reasons. All
applicable installation and removal costs or losses will not be taken over by the company Dynavin or
its recognized distributors and dealers.
The guarantee claim as well as the operation permission by:
a) tampering with the device or accessories which have not been carried out or approved by the
manufacturer or its partners
b) Open the housing of the device
c) repairs carried out on the device
d) Improper use / improper usage / operation
e) brute force to the device (drop, willful damage, accident, etc.)
Install in accordance with all safety relevant and legal directions.
For these reasons:
Can the installation be carried out only by trained specialist staff. Installation should only be performed
when de-energized. In certain installations so the battery must be disconnected from the electrical
system. Make sure that the provisions of the vehicle manufacturer as an intrusion into the vehicle
electronics may result in loss of warranty.
Never use safety-related connections or mounting points. Such as steering, braking systems or other
vehicle-related safety components for your own safety and that of other road users not to compromise.
Connect the device only to those car-specific power and ground points specified by us.
Avoid settings on the device causing them to be distracted from the actual driving process and thereby
endanger yourself and other road users. Note also that the legal provisions of their country.
References of legal regulations for operation
Put the device only in the intended domain.
If the unit is not installed properly, or where alterations void the approval and the warranty.
Use only original CD/DVD no Mini-Disks or other shaped disks. This can damage the disk drive oft he
unit
The CD / DVD drive is provided with transport locks. Remove this before installation. Otherwise no
media can be introduced into the drive.
Marking of products using laser scanners
This marking indicates the contained components in the appliance
using a weaker class 1 laser for scanning media.
Konformitätserklärung in Bezug auf die EMC Vorschrift ETSI EN301 489
Konformitätserklärung in Bezug auf die Radio Vorschrift ETSI EN300328
Konformitätserklärung in Bezug auf die Safty Vorschrift EN60065
