39
USB function
To access the USB function press on the touch screen this option or press the push button on the front
of the Dynavin device that is labeled USB.
You can only enter the menu when you used to connect a USB device to the device via USB.
Use only USB media formatted with FAT16/32. Otherwise it can happen that the unit can not be read
in the media. The connected USB media should not exceed a maximum of 64 GB.
After pressing the USB button the USB menu is invoked and the content will be loaded
.
Depending on
the size and amount of data, this can take a few seconds.
If you want to use a hard disk, please pay attention to the necessary operating current. Since some
hard drives have a higher consumption as it can be supplied by Dynavin unit.
It can therefore happen that you have to use an external power source.