12
Operation of the touchscreen
Most functions of the Dynavin device are controlled through the touch surface. This means that you
should to ensure the most accurate possible control perform a calibration of the screen.
To facilitate the operation, some functions and actions you can perform on the screen shown with
symbols in the instructions.
Touch the screen (short)
Touch the screen (long)
Press and hold and move
As on a smartphone you can move the surfaces. To do this, touch the screen and slide the surface to
the left or right.
Calibration
To do this, first press on the left side of the SRC button. This will take you to the main menu of the
Dynavin unit.
Now select the main menu
Setting icon.
Touch just the icon
with a finger on the
screen.
This can be found on the second page of the main menu
In the settings menu press on the lower part of the menu screen - calibration.
