26
Phone function
To access the Phone function, press on the touch panel displayed option or press and release the
right knob.
In order to use the phone or Bluetooth function, connect first your phone to your Dynavin unit.
Enable the BT option on your phone and search for any nearby devices. If your phone has finished the
search, you should see the display Dynavin-N6. Pair the phone with the device.
Once your cell phone or smartphone connected to the Dynavin unit, this is displayed in the menu.
Disconnect, in the upper left corner and the gray
icons in the lower left corner show to you
that the phone is not connected with the unit.
When the connection is established, the name
of the phone is at the top left. Top right when the phone transmits information of the state of charge
and the field strength is displayed.
Left below the icons for the phone book and favorites are displayed.
Once the connection is made your phone will connect every time even if you have the BT option
switched on and the phone is within the range of the device
.
