Diamond 36kW Manual
Dynatronix, Inc.
198-1600-00 Rev F
Page 7 of 146
2. Safety Precautions
Before proceeding any further through this manual, this section should be read thoroughly to
protect yourself and your equipment.
1. To properly operate this power supply, only electric cords with a dedicated ground wire are
to be used.
2. The electric cord providing power to the machine should be plugged in only to a grounded
outlet that complies with U.L. and/or OSHA safety requirements, or local regulations.
3. Do not open the power supply cabinet, there are no user serviceable parts. This power
supply contains components that could remain charged and pose an electric shock hazard
for an extended period of time after AC power has been removed from the unit.
4. Remove AC power from this unit before moving the power supply or servicing the power
supply (including output bus wiring changes) or any equipment connected to this power
supply. Follow your lock out / tag out procedures to ensure that power is not unexpectedly
applied.
5. This unit contains no user serviceable parts. All repairs or modifications to this unit must be
done at the Dynatronix factory, or at an authorized Dynatronix Service Center, or by a
qualified service technician. See the Table of Contents section for a list of authorized
service centers in the USA and Europe.
6. DO NOT wear metal objects on hands or wrists while working with this power supply.
7. If the equipment is used in a manner other than mentioned in this manual, the protection
provided by this equipment may be impaired.
C A U T I O N
TO REDUCE THE RISK OF ELECTRIC
SHOCK, UNIT MUST BE CONNECTED
TO EARTH GROUND.
REMOVE POWER BEFORE
OPENING PANELS.
TO EARTH GROUND.
REMOVE POWER BEFORE
OPENING PANELS.
