SD-BOX INSTRUCTION MANUAL, CODE: DYN 81.01.00
Date: 03/03/2020
Version 00
- 5 -
4. MAIN FEATURES
4.1.
TECHNICAL FEATURES
Important note
The response time is the interval from the SD-BOX receiving the
signal to performing the relevant action. It does NOT include the
lift unlocking zone sensor detection time, the coil activation time
or the drift control sensor state change.
Important note
The batteries are rechargeable and are charged by the SD-BOX
itself. Under no circumstances should any extra charger be
connected between the batteries and the SD-BOX.
Important note
The coil is overexcited to 30 V
DC
for a brief period of time to
prevent possible failures in the overspeed unlocking.
4.2.
ENVIRONMENTAL OPERATING CONDITIONS
Temperature
5 - 40ºC
Humidity
15 - 85% without condensation
1
The battery charger has been optimised for Ni-Cd batteries. If you use other types of batteries their life will
be reduced. Dynatech is not responsible for the use of batteries other than the Ni-Cd type.
2
1A protection fuse is required
3
If the SD-BOX is placed in locations 2000-4000m above sea level, the maximum voltage at the door input is
limited to 160V
AC/DC
.
4
If the SD-BOX is placed in locations 2000-4000m above sea level, the maximum voltage at the motor input
is limited to 160V
AC/DC
.
Power supply
INPUT
24 V
DC
(1.5A max.) SELV/PELV
Rechargeable battery power
INPUT
12 V
DC
, 1,5 Ah
Power supply for the governor
unlocking electric coil
OUTPUT
24 V
DC
; max 800 mA
Power supply for the governor
unlocking sensor
OUTPUT
24 V
DC
10mA max.
Max. safety line current
OUTPUT
1A max.
Control system response time
-
30ms
Door signal
INPUT
24 - 230 V
DC,
24 - 230 V
AC
(±10%)
50mA @ 24 V, 20mA @ 230 V
Motor signal
INPUT
24 - 230 V
DC,
24 - 230 V
AC
(±10%)
50mA @ 24 V, 20mA @ 230 V
Level 1 signal
INPUT
24 V
DC
Level 2 signal
INPUT
24 V
DC
External manual rescue signal
INPUT
24 V
DC
External reset signal
INPUT
24 V
DC
Box IP protection index
-
SD-BOX: IP20
Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer
area in Dynatech’s website in order to consult the full manual; http://customers.dynatech-elevation.com/
Summary of Contents for SD-BOX
Page 2: ......
