SD-BOX INSTRUCTION MANUAL, CODE: DYN 81.01.00
Date: 03/03/2020
Version 00
- 4 -
2. RISKS AND SAFETY WARNINGS
2.1.
ELECTRICAL RISK
Electrical
risk
Do not handle or open the box when its terminals are connected to
the power supply system.
3. USE
3.1.
TYPE OF LIFTS
It can be used in the following lifts:
•
With or without a machine room.
•
With or without re-levelling.
•
With or without pre-opening doors.
Important
note
Lifts with a pre-opening door system must be certified according to the
EN 81-20 standard, table A.1, section
5.12.1.4.a)
Control of levelling,
re-levelling and preliminary controls
or section
5.12.1.8.2 Device for
bridging the landing door and car contacts
3.2.
EXCLUSION OF LIABILITY
DYNATECH DYNAMICS & TECHNOLOGY, SL will not be held responsible for damages caused
by not observing any of the points in this document.
Strictly prohibited:
Intervening on any component within the box.
Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer
area in Dynatech’s website in order to consult the full manual; http://customers.dynatech-elevation.com/
Summary of Contents for SD-BOX
Page 2: ......
