D012
-
091
-
2 MediTEST User Guide Page 5
-
1
INITIAL CONFIGURATION
SECTION 5: INITIAL CONFIGURATION
This section considers:
•
System Settings
•
User names and passwords
•
Test method
•
Product selector
•
Test data and batch records
5.1 BEFORE YOU START USING THE SYSTEM
The system features and functions will be configured or programmed either at the factory or at time of
commissioning. Time should be allocated by the responsible person (Administrator) to familiarise
themselves with these functions and the operation of the system.
If it is assumed that the system has been configured ready for pack testing (and not evaluation
purposes) then the Administrator (responsible person) should make some basic configuration checks
before first use, as it is possible that some setting may have been altered during set
-
up (such as for
illustrative training purposes).
This section highlights the basic features and functions that should be checked against for correlation
with the corresponding configuration tables. The diagram below shows how to navigate around the
system. Note, that screen images are for illustration only.
A full description of functions and features appear later in this document.
The configuration setting relate to the system specified on page ii and were correct at
the time of handover to the customer.
CAUTION
FRONT PANEL
OPERATING
SYSTEM
RESULTS
MENU
PRODUCT
SELECTOR
TEST
METHODS
DATA
MANAGER
USER
ACCOUNTS
SYSTEM
SETTINGS
