Dynapac F1800C, Operation & Maintenance Manual

Page: 195 / 348

D 40.18 3
Before starting work
(in the morning or when starting paving)
- Heed the safety instructions.
- Check the personal protective equipment.
- Take an inspection walk around the paver finisher and check for leaks and damages.
- Install parts removed for transportation or for the night.
- When screed is operated with the optional gas heating system, open the closing
valves and the main shut-off valve.
- Perform the check according to the "Checklist for the vehicle operator" given below.
Check list for the machine operator
Check! How?
Emergency stop button
- on the operating panel
- on both remote controls Push in the button.
The diesel engine and all running drives
must stop immediately.
Steering
The paver finisher must immediately
follow every steering wheel movement
in a precise manner. Check straight
ahead travel.
Horn
- on the operating panel
- on both remote controls
Briefly press the horn button.
Horn signal must sound.
Lights
Switch on with the ignition key,
walk around the paver finisher
to check and switch off again.
Screed hazard flasher
(with vario screeds)
With the ignition switched on,
press the switches for extending/
retracting the screed parts.
The rear lights must flash.
Gas heater system (
o
):
- Bottle holder
- Bottle valve
- Pressure reducer
- Hose rupture protection
- Closing valve
- Main shut-off valve
- Connections
- Indicator lamps of the switch box
Check:
- Secure seat
- Cleanliness and tightness
- Working pressure 1.5 bar
- Function
- Function
- Function
- Tightness
- All indicator lamps must light up
when the system is switched on