Dynapac F1250CS, Application, Operation & Maintenance

Page: 75 / 348

C 10.12 23
8 Towing
f Heed all regulations and apply all safety measures applicable for towing heavy con-
struction machines.
m The towing vehicle must be capable of securing the paver finisher, even on slopes.
Use only approved tow bars!
If necessary, remove any attachments and accessories from the paver finisher and
the screed until the basic width has been attained.
A
A hand pump (1) is located in the engine compartment (left side); it must be actuated
to be able to tow the machine.
Pressure for releasing the traction system brakes is built up with the hand pump.
- The drive engine is switched off,
- Push knob (2) into the valve body.
While pumping (next step), check
that the knob remains in the pressed
position.
- Actuate lever (3) of hand pump until
sufficient pressure has been built up
and traction system brakes have been
released.
m On completion of the towing process, re-
store the initial status.
m Only release the traction system brakes
when the machine is sufficiently secured
against accidental rolling or is already
properly connected to the towing vehicle.
3
4
1
2
2
1
3