Dynapac F1250CS, Application, Operation & Maintenance

Page: 149 / 348

D 10.12 69
Item Designation Brief description
112
Main function
switch
"Lock function"
Pushbutton function:
- To lock all functions relevant to paving. Despite
"Auto" settings in the individual functions, these are
not activated when the drive lever is swivelled out or
when the drive lever is swivelled out and stopped.
- The tamper, vibration and levelling functions are not
deactivated until the drive lever has been brought into
the zero position!
A
LED indicator lamp (108) confirms the activated function.
A
The preset vehicle can be relocated and released at
the new paving location.
113
Raise / lower
screed
Lower
floating position
Pushbutton/detent switch function:
- Button switching position at top:
Lift the screed.
After end of operation:
Screed is hydraulically blocked in position.
- Locked switch position at bottom:
Lower floating position: Screed is lowered
and released in the floating position when the drive le-
ver is deflected.
A
To prevent the screed from lowering during an interme-
diate stop (drive lever in centre position), the screed is
hydraulically held in position via relief pressure and the
counter pressure of the material.
m Check whether the screed transport safeguard is inserted!
f On actuation, heed danger zones of moving parts of
the vehicle!