Dynapac F1250CS, Application, Operation & Maintenance

Page: 27 / 348

B 3
2.1 Vehicle
Construction
The paver finisher has a welded steel frame on which the individual components
are mounted.
The caterpillar drives are part of the frame structure; the suspension of the attached
screed additionally helps to attain high paving precision.
The continuously adjustable hydrostatic travel drive allows the speed of the paver fin-
isher to be matched to all work conditions.
The operation of the paver finisher is considerably facilitated by the independent trav-
el drives and the clearly structured operating components and controls.
The following extra equipment (option) is available:
o
Hydraulic front hopper flap
o
Material chute / hinged material chute
o
Remote control
o
Additional headlights, warning lamps
o
Emulsion spraying system
o
Automatic levelling system
o
Larger working widths
o
Alternator for electric heater
o
Further equipment and upgrade options on request
Engine:
The paver finisher is equipped with a water-cooled 4-cylinder Deutz diesel en-
gine. For further information please refer to the operating instructions for the engine.
Drive unit:
Both caterpillar drives are directly driven by separate drives. They operate
directly, without any drive chains which require maintenance or servicing.
The tension of the caterpillar chains can be readjusted using tensioners.