Dynapac DRP45DX, Operating Instructions Manual

Page: 93 / 124

8. Insert the air filter (1) carefully into the filter housing and
fasten it with the knurled nut (2).
9.
NOTICE!
Danger of engine damage!
– Ensure correct fit of air filter cover and
seal.
Close the cap (3).
8.9.6 Changing the oil in the exciter housing
NOTICE!
Components may get damaged!
– Use only oil of the permitted specification
Ä Chapter 8.4 ‘List of fuels and lubricants’
on page 76 .
– Do not use low-ash engine oils for the exciter
shaft housing.
Protective equipment: n Working clothes
n Safety shoes
n
Protective gloves
1. Drive the machine onto horizontal, level, firm ground.
2. Park the machine safely
Ä
Chapter 6.4 ‘Parking the machine
in secured condition’ on page 63 .
3. Clean the area around the bleeding screw (1) and filling/drain
plug (2).
4. Tilt the machine slightly towards the oil drain side and secure
it properly.
5. Unscrew the bleeding screw.
6. Unscrew the filling/drain plug and collect any oil running out.
Fig. 102
1
2
B-695-0179
Fig. 103
Maintenance – Annually / every 250 operating hours
DRP45DX 93