Dynapac DRP45DX, Operating Instructions Manual

Page: 89 / 124

4. Loosen the hose clamp and route the drain hose to the out-
side.
5.
WARNING!
Danger of burning on hot components!
– Wear your personal protective equipment
(protective gloves, protective clothing).
– Avoid touching hot components.
Unscrew the drain plug and collect any oil running out.
6. Clean and screw in the drain plug.
7. Assemble the drain hose with the hose clamp.
8. Loosen the screw for approx. five turns and pull the oil filter
out of the housing.
9.
CAUTION!
Danger of eye injuries caused by particles
flying around!
– Wear your personal protective equipment
(protective gloves, protective clothing,
goggles).
Use compressed air to blow the oil filter out from the inside to
the outside.
B-695-0119
Fig. 92
Cleaning the oil filter
B-HAT-0048
Fig. 93
B-HAT-0049
Fig. 94
Maintenance – Annually / every 250 operating hours
DRP45DX 89