manualshive.com logo in svg

Dynapac DRP45DX, Operating Instructions Manual

Share
Download
Dynapac DRP45DX Operating Instructions Manual Download Page 25

3.4.3  Safety regulations and environmental protection regulations for handling oil

WARNING!
Danger of burning by ignited oil!

–

Do not allow oil to come into contact with hot

components.

–

Smoking and open fire is prohibited!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing).

CAUTION!
Health hazard caused by contact with oil!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing).

–

Do not inhale any oil vapours.

–

Avoid contact.

CAUTION!
Danger of slipping on spilled oil!

–

Immediately bind spilled oil with an oil-binding

agent.

ENVIRONMENT!
Oil is an environmentally hazardous substance!

–

Always keep oil in proper containers.

–

Immediately bind spilled oil with an oil-binding

agent.

–

Dispose of oil and oil filter according to regula-

tions.

Fig.  5

Concerning your safety – Handling fuels and lubricants

 

DRP45DX

 

25

Summary of Contents for DRP45DX





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands