Dynapac CP 132, Maintenance Manual

Page: 5 / 27

3
CP 132 M132EN3
LUBRICANTS AND SYMBOLS
ENGINE OIL Shell Rimula TX SAE 15W/40 or equivalent
ambient air temperature API CF-4/SG, (CD/CE)
-10°C – +50°C (14°F – 122°F)
HYDRAULIC OIL
ambient air temperature
Shell Tellus TX68 or equivalent.
-10°C – +40°C (14°F – 104°F)
ambient air temperature
Shell Tellus TX100 or equivalent.
above +40°C (above +104°F)
BIOLOGICAL Shell Naturelle HF-E46
HYDRAULIC FLUID The machine may be filled with biologically
degradable fluid from the factory. The same type of
fluid must be used when changing or topping off.
GREASE Shell Retinax LX2 eller motsvarande
FUEL See the engine manual.
COOLANT Shell Anti-Freeze 402 or equivalent.
mixed 50/50 with water Anti-freeze protection down to about -35°C (-31°F).
Engine, oil level Oil for lubrication
Engine, oil filter Battery
Hydraulic oil reservoir, level Tire pressure
Hydraulic fluid filter Sprinkler
Coolant, level Sprinkler water
Fuel filter Recycling
Air filter
When driving in extremely high or low ambient tempe-
ratures, other lubricants are needed. Refer to the
chapter entitled “Special Instructions” or contact
Dynapac.
Always use high-quality lubricants, in the quantities
specified. Excess grease or oil can promote
overheating, resulting in premature wear.
50 /
50
CAUTION
CAUTION