Dynapac CP 132, Maintenance Manual

Page: 15 / 27

13
CP 132 M132EN3
EVERY 10 HOURS OF OPERATION (Daily)
Water tank – Filling
18
Fig. 11 Water tank
17. Water pump and filter
18. Nozzle
26. Filler cap
18
17
26
Brakes – Check
Check operation of the brakes as follows:
Drive the roller slowly forward.
Push in the reserve/parking brake knob (15).
The brake warning lamp (26) on the instrument panel
should light and the roller should stop.
After testing the brakes, set the forward/reverse lever
(17) in neutral.
Pull up the reserve/parking brake knob (15).
The roller is now ready for operation.
Fig. 12 Instrument panel
15. Reserve/parking brake knob
17. Forward/reverse controls
26. Brake warning lamp
17
26
15
Watering is required until the tires reach working
temperature when rolling asphalt compounds.
To keep the sprinkler (18) free from contami-
nation, use only pure water in the tank.
Screw off the tank cap (26) and fill with pure water; do
not remove the strainer.
Check the sprinkler system before operation.
Sole additive: Small amount of environment-
friendly antifreeze liquid.
WARNING
CAUTION