Dynapac CC1000, Instruction Manual

Page: 87 / 116

Maintenance - 50h
4812160801_D.pdf 2018-12-17
Maintenance - 50h
Every 50 hours of operation (Weekly)
Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified. Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning. Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.
Ensure that the engine cover is fully open when
work is being carried out under it Ensure that the engine cover is fully open when
work is being carried out under it
After the first 50 hours of operation, the oil filters
should be changed. After the first 50 hours of operation, the oil filters
should be changed.
Air cleaner - emptying
Fig. Air cleaner
1. Dust trap
1
Empty the air cleaner dust trap (1) through pressing
the rubber bellows using the fingers. Check also that
the air hoses are intact.
Clean the air cleaner when operated in extremely
dusty environments .
Refer also to the section in the manual on operation.
79