Dynapac CA3500DCP, Instruction Manual

Page: 153 / 178

Maintenance - 1000h
4812165301.pdf 2022-09-02
Fig. Left drum side
1. Filler plug
2. Drain plug
3. Sight glass
1
2
3
The oil should now come up to the sight glass (3).
If necessary, release the filler plug (1) and fill to half
the sight glass (3).
Clean the magnetic filler plug (1) of any metallic
residue, before refitting the plug.
Ensure that only Dynapac Drum Oil 1000 is used
in the cartridges. Ensure that only Dynapac Drum Oil 1000 is used
in the cartridges.
Do not overfill with oil - risk for overheating. Do not overfill with oil - risk for overheating.
Now repeat the procedure on the opposite side of the
drum.
Fig. Drum
1. Ventilation screw
1
Drum cartridge - Cleaning the ventilation screw
Clean the drum's ventilation hole and ventilation screw
(1). The hole is required to eliminate excess pressure
inside the drum.
Fig. Drum
1. Oil level glass
1
Drum cartridge - Oil level glass
Check on both drum cartridges.
Inspect the oil level glass, in case of damage, change
to a new one.
At service 2000h, it should be replaced if no change
has been made before.
141