Dynapac CA3500DCP, Instruction Manual

Page: 15 / 178

Introduction
4812165301.pdf 2022-09-02
CALIFORNIA
Decal and location of decal shown in section
Machine description.
Proposition 65
General
This manual contains instructions for machine
operation and maintenance.
The machine must be correctly maintained for
maximal performance.
The machine should be kept clean so that any
leakages, loose bolts and loose connections are
discovered at as early a point in time as possible.
Inspect the machine every day, before starting.
Inspect the entire machine so that any leakages or
other faults are detected.
Check the ground under the machine. Leakages are
more easily detected on the ground than on the
machine itself.
If faults or suspected damage are detected on the
roller, contact the responsible supervisor for any action.
THINK ENVIRONMENT ! Do not release oil,
fuel and other environmentally hazardous
substances into the environment. Always send
used filters, drain oil and fuel remnants to
environmentally correct disposal. THINK ENVIRONMENT ! Do not release oil,
fuel and other environmentally hazardous
substances into the environment. Always send
used filters, drain oil and fuel remnants to
environmentally correct disposal.
This manual contains instructions for periodic
maintenance, where maintenance after every
10 and 50 hours of operation can be performed
3