Dynapac CA280, Maintenance Manual

Page: 11 / 35

9
CA280 M280EN1
MAINTENANCE MEASURES
Items in Measure See page Comments
fig. 1
22 Check the oil level in the rear axle/planetary gearing 17
12 Check oil level in the gearbox 18 Accessory D
14 Check oil level in the drum cartridge 18, 19
31 Clean the coolers 20
19, 23 Inspect tightening of bolted joints 20 Applies only to new or
renovated component.
15 Check rubber elements and bolted joints 21
29 Check the battery 21
Every 250 hours of operation (monthly)
Items in Measure See page Comments
fig. 1
7 Change the hydraulic filter 23
8 Drain condensation from the hydraulic reservoir 24
25 Drain condensation from the fuel tank 24
4 Replace main filter in the air cleaner 24
21 Change oil in the rear axle differential 25
22 Change oil in the rear axle planetary gearing 26
Check engine valve clearance See engine instruction manual
32 Check belt tension of drive system See engine instruction manual
Every 1000 hours of operation (every six months)
Items in Measure See page Comments
fig. 1
8, 9 Change the hydraulic fluid 27
12 Change oil in the drum cartridge 27
12 Change oil in the drum gearbox 28 Accessory D
33 Lubricate the Forward/Reverse controls 28
Every 2000 hours of operation (yearly)
Items in Measure See page Comments
fig. 1
24 Change engine oil and oil filter 22 See engine instruction manual
3 Replace fuel filter See engine instruction manual
3 Clean the initial fuel filter 22
6 Inspect breather filter on the hydraulic reservoir 23
Every 500 hours of operation (every three months)