16
CA280 M280EN1
1
2
EVERY 50 HOURS OF OPERATION (Weekly)
Tire pressure
Wheel nuts – Tightening
Check the tire pressure with a pressure gauge.
Since the tires are filled with liquid, the air pressure
valve (1) must be set at ”12 o’clock” when you check
or pump air.
Tire pressure is noted under the heading Specifica-
tions.
Check both tires.
When you change the tires, it is important that
both tires have the same rolling radius, to
ensure proper operation of the anti-slip device
in the rear axle.
Check tightening torque of the wheel nuts (2) at 470
Nm (350 lbf.ft).
Check both wheels and all nuts.
(Applies only on new machine or newly fitted wheels.)
When pumping the tires, see the safety
manual that accompanies the roller.
Note: The tires are filled with liquid, so
they are heavier than normal.
Fig. 17 Wheels
1. Air valve
2. Wheel nut
Summary of Contents for CA280
Page 2: ...19 ILF015WO1 ...
Page 35: ......
