Dynapac CA280, Maintenance Manual

Page: 4 / 35

2
CA280 M280EN1
CONTENTS
Read the entire manual before starting any
service work.
Ensure that ventilation (extraction) is adequa-
te if the engine is run indoors.
It is essential that the machine is cared for in a proper
manner to ensure satisfactory operation. Keep the
machine clean to facilitate quick and timely detection of
any leakage, loose bolts and loose connections.
Make a habit each day, before starting up, of checking the
roller to detect any leakage or damage. Also check the
ground underneath the roller, where it is most often easier
to detect any leakage.
TAKE CARE OF THE ENVIRONMENT
Do not leave behind any oil, fuel or other
substances that are detrimental to the
environment.
This manual contains instructions for periodic measures
that should normally be performed by the operator.
The manufacturer’s instructions noted in the
engine manual also apply. This is placed under a
separate flap in the roller’s product folder.
GENERAL
Safety instructions—Personal safety
Special caution—Machine or component damage
WARNING SYMBOLS
CALIFORNIA
Proposition 65 Warning
Diesel engine exhaust and some of its
constituents are known to the State of
California to cause cancer, birth defects,
and other reproductive harm.
Page
Lubricants and symbols ................................................... 3
Technical specifications ................................................ 4-6
Maintenance schedule ..................................................... 7
Maintenance measures ................................................ 8, 9
Every 10 hours of operation (Daily) .......................... 10-13
Every 50 hours of operation (Weekly) ...................... 14-16
Every 250 hours of operation (Monthly) .................... 17-21
Every 500 hours of operation (Every three months) ...... 22
Every 1000 hours of operation (Every six months) .. 23-26
Every 2000 hours of operation (Yearly) .................... 27-28
Long-term Storage ......................................................... 29
Special instructions ........................................................ 30
Electrical system, fuses ........................................... 31, 32