18
CA152A M152AEN2
1
3
2
1
1
EVERY 250 OPERATING HOURS (MONTHLY)
Rear axle differential
– Check oil level
Never work under the roller with the engi-
ne running. Park on a level surface. Block
the wheels securely.
Wipe clean and remove the level plug (1) and check
that the oil level reaches the lower edge of the plug
hole. Top off with oil to the right level if the level is low.
Use transmission oil according to the lubricant
specification.
Fig. 25 Oil level check – differential housing
1. Oil level/Filler plug
Rear axle planetary gears
– Check oil level
Fig. 26 Oil level check – planetary gear
1. Oil level/Filler plug
Position the roller with the level plug (1) in the planetary
gears at 9 o’clock.
Wipe clean and remove the level plug (1) and check
that the oil level reaches the lower edge of the plug
hole. Top off with oil to the right level if the level is low.
Use transmission oil according to the lubricant
specification.
Clean and screw in the plug.
Check the oil level in the same way in the rear axle’s
other planetary gear.
Fig. 27 Right side of drum
1. Filling plug
2. Number plate
3. Sight glass
Position the roller on a flat surface so that the filler plug
(1) and number plate (2) on the right side of the drum
are straight up.
Oil level should reach up to the sight glass (3).
Top off as required through the filler plug (1) halfway on
the sight glass.
Clean the magnetic filler plug (1) from any metal parti-
cles before refitting it.
See lubricant specification for the right grade of oil.
Do not overfill with oil, risk of overheating.
Drum
– Checking the oil level
Summary of Contents for CA152A
Page 2: ...19 ILF015WO1...
