Dynapac CA152A, Maintenance Manual

Page: 11 / 37

9 CA152A M152AEN2
MAINTENANCE MEASURES
Item. in Measure See page Comments
fig. 1
9, 10 Change fluid in hydraulic tank 26
13, 16 Change oil in roller 26
11 Lubricate Forward/Reverse control 27
Overhaul air conditioning 29 Optional
Item. in Measure See page Comments
fig. 1
26 Check the oil level in rear axle/planetary gearing18
13 Check the oil level in drum 18
35 Clean the radiators 19
24, 28 Inspect and tighten bolted joints 19 Applies only to new and
repaired components
17 Inspect rubber elements and bolted joints 19
34 Inspect the battery 20
Inspect the air conditioning 20 Optional
Every 250 operating hours (monthly)
Item. in Measure See page Comments
fig. 1
7 Check bleeder filter on hydraulic tank 23
8 Change the hydraulic fluid filters 23
9 Drain condensate from hydraulic tank 23
30 Drain condensate from fuel tank 24
4 Replace air cleaner main filter 24
27 Change oil in rear axle differential 24
26 Change oil in rear axle planetary gears 25
38 Replace the fresh air filter in the cab 25 Optional
Check diesel engine valve clearance See engine manual
37 Check belt tension for drive belt system See engine manual
Every 1000 operating hours (every six months)
Every 2000 operating hours (every year)
Item. in Measure See page Comments
fig. 1
3 Replace fuel filter See engine manual
5 Lubricate controls and joints 21
3 Replace fuel pre-filter 21
29 Change engine oil and oil filter 21 See engine manual
22 Lubricate the steering chain 22 Optional
21 Lubricate the seat bearing 22 Optional
Every 500 operating hours (every three months)